A brushed metallic grey aluminium angle trim that gives corners and edges a calm, modern finish – ready to fit, with no painting needed.

This 90° equal L profile is made from anodised aluminium with a fine brushed texture running along its length. The colour is a light, warm metallic grey with a subtle taupe undertone – closer to brushed nickel or titanium than to cold silver or steel. Its satin finish has a soft sheen that changes gently with the light, so the trim looks refined without standing out too much.

The small sizes suit tile edges, shelves and furniture, while 25 x 25 mm and 30 x 30 mm work well on wall corners and panel edges. It sits nicely next to brushed nickel taps and handles, grey or stone tiles, concrete effects and light wood. Prefer plastic? See our light grey PVC corner angle trim. The same brushed aluminium angle also comes in black and brushed gold.

Sizes Available:

Key Features

• Manufactured in the EU
• Colours may look slightly different depending on your screen and lighting

Where to Use It

• Finishing and protecting wall corners and plaster edges
• Tile edges and splashbacks
• Furniture, shelves, cabinet and worktop edges
• Frames, panels and decorative strips
• Modern, industrial and Scandi interiors with grey or nickel fittings

How to Install

1. Measure the edge and mark the required length on the profile.
2. Cut to size with a fine-tooth hacksaw and lightly file the cut end; mitre at 45° for neat corners.
3. Make sure the surface is clean and dry.
4. Fix in place with a suitable adhesive, screws or rivets.
5. Handle the visible face with care during fitting to keep the brushed finish clean.

Specifications

• Profile: 90° equal angle (L profile) – sizes are leg x leg x wall thickness
• Sizes: as shown in the table above
• Wall thickness: 1 mm (0.04 in) in every size
• Length: each variant is one 1 m length (100 cm / 39.37 in)
• Material: Anodised aluminium
• Colour: Brushed Metallic Grey, anodised satin finish